濟南市標牌標識在人們的生活起居中非常火爆，隨之其運用范疇的不斷發展，大伙兒對其掌握再進一步，那大伙兒對標識牌的形狀歸類及維修保養方法掌握是多少？接下去，山東省門頭廣告制作生產廠家將在下文為大伙兒詳細介紹一下下，期待能幫上大伙兒。

The logo of the market is very popular in people's daily life. With the continuous development of its application scope, everyone will have a further understanding of its logo. How much do you know about the classification and maintenance of the sign? Next, the advertising production and production manufacturer will give you a detailed introduction below, and we look forward to helping all of you.

1、標識牌的形狀歸類形狀歸類是標識牌的選擇項，其緣故由于它的差別顯著。形狀歸類也可分成下列幾大類。

1. The shape classification and shape classification of the logo is the choice of the logo, because of its significant difference. Shape classification can also be divided into the following categories.

（1）突形標識牌：在房屋建筑的墻壁上突顯，除開反面之外的整塊或者有兩邊墻壁的狀況下兩邊都被運用為廣告詞質粒載體的標識牌。 （2）橫式標牌：整個比例橫長比較長，一般整面都被利用為廣告標牌，一般在小店鋪和大建筑的墻面上可以看到。

(1) Protuberant sign: The sign is prominent on the wall of the building. In addition to the reverse side, the whole block or the two sides of the wall are used as the carrier of the advertising word plasmid. (2) Horizontal signs: the whole proportion of the horizontal length is relatively long, generally the whole face is used as advertising signs, generally in small shops and large buildings can be seen on the walls.

（3）屋頂式標牌：指在一些房屋建筑的房頂上設定某些固定不動構筑物，并在上邊掛著或貼緊的板型或立方形或幻燈形的標識牌。

(3) Roof sign: a sign with a fixed structure on the roof of some buildings and a plate or cubic or slide shape hanging or clinging to it.

（4）地柱形標牌：標記在地面的某些固定構造物上的橫形、豎形、立體形的標牌。

(4) Ground column signs: horizontal, vertical and three-dimensional signs marked on some fixed structures on the ground.

（5）豎形標牌：全部占比豎長較為長，通常整塊都被運用為戶外廣告燈箱。

(5) Vertical signs: the total proportion of vertical length is relatively long, usually the whole block is used as outdoor advertising light box.

2、維護保養技巧（1）山東標識標牌制作廠家告訴大家整體效果的動態濟南標識牌，有技術要求需拆洗時，要進行解體檢查和清洗。并做好相應的標志和記錄，組裝及維護的牌體需要達到設計要求和質量標準，確保導向標識系統正常運行。

2, maintenance skills (1) logo logo production manufacturers tell you the overall effect of dynamic signs, there are technical requirements to be disassembled and washed, disintegration inspection and cleaning. And the corresponding logo and record, assembly and maintenance of the brand body needs to meet the design requirements and quality standards, to ensure the normal operation of the guiding logo system.

（2）對污染的標識牌要進行清理和清洗，清除內部的灰塵、邊角料等雜物，對無法進行人T清除的標識牌要用壓縮空氣進行吹掃。

(2) Cleaning and cleaning of the polluted signs, cleaning of the internal dust, corners and other debris, and purging of the signs that cannot be cleaned by human T with compressed air.

濟南標識標牌（3）導向標牌管理應做到降低維修保養成本、減少維修作業次數及維修時間、簡化維修操作程序，做到可靠性、安全性。

The sign signs (3) should be lowered to reduce the cost of maintenance and repair, reduce the number of repair operations and maintenance time, simplify maintenance operation procedures, and achieve reliability and safety.

（4）當維修人員維修某部件時無需拆除其他部件：在維修或更換某部件時無需拆換箱體。

(4) When maintenance personnel repair a part, they do not need to dismantle other parts: when repairing or replacing a part, they do not need to dismantle the box.

（5）構件或組件都設計成可具修復性;設備可以在現有維修條件下進行維修。

(5) Components or components are designed to be repairable; equipment can be maintained under existing maintenance conditions.

（6）緊固件及標準件采用公制：相同功能的部件可以互換。

(6) Fasteners and standard parts adopt metric system: components with the same function can be exchanged.http://www.zhujunwang.com